Rechargeable LED work lights · MOQ 500 / model · samples first · private label

sales6@nhruichi.com+86 15258299580

Request a sample

Lumens vs Lux vs Candela: Reading a Work Light Spec Sheet

Lumens measure the total light a work light gives out; lux measures how much of that light lands on a surface (1 lux = 1 lumen per square metre); candela measures how intense the beam is in one direction, which sets how far it reaches. Flood lights are compared by lumens and beam angle, spotlights by candela and beam distance. All 37 of our models with a stated output are listed in lumens, from 180 to 3,000 lm.

UnitWhat it measuresUse on work lights
Lumen (lm)Total light output of the lampCompare overall output of flood and area lights
Lux (lx)Light landing on a surface: lumens per m²How bright the work area is at a given distance
Candela (cd)Light intensity in one directionCompare spotlights and torches
Beam distance (m)Distance at which the beam falls to 0.25 lux (ANSI/PLATO FL1); equals 2 × √cdTorches and searchlights
Same beam, further awayIlluminanceWhy
1 m400 lxExample starting value
2 m100 lxTwice the distance → a quarter of the light per m²
4 m25 lxInverse-square law: lux falls with the square of distance

Our figures come from our product catalogue (updated 2026-11-16); general guidance describes typical values, not a guarantee for every product.

Why do two 1,000-lumen work lights look different?

Because the same lumens can be spread over a wide or a narrow area. A wide COB panel spreads light evenly with few shadows; a narrow beam puts more lux on a smaller spot and reaches further. Beam angle matters as much as the lumen figure — see flood vs spot work lights.

Why don't most work-light specs show candela?

Most work lights are wide-beam flood lights, where lumens and beam angle say more. Candela and beam distance are mainly used for torches and spotlights. 4 of our listings give an approximate range (RC-W21016 (About 100m), RC-W23003 (50-100m), RC-W23113 (About 100m), ZJ-8859 (50-100m)) without a stated measurement method; before printing a beam distance on your packaging, ask for it measured to ANSI/PLATO FL1.

How can an importer compare work lights when the specs use different units?

Compare lumens and runtime for each mode from the spec sheet, then check samples side by side: measure lux at the same distance (for example 1 m) with a lux meter. See the sample checklist and compare all models in the spec finder.

FAQ

More questions

How many lux is 1,000 lumens?

It depends on the area lit: 1,000 lm spread evenly over 1 m² is 1,000 lx, over 4 m² it is 250 lx. In practice it is lower, because not all the light lands on the work area.

Should a floodlight be compared by lux or lumens?

Use lumens and beam angle from the spec sheet to shortlist, and lux at a fixed distance to check samples. See our rechargeable floodlights.

Request samples or a quote

Tell us what you need

Product type and quantity are enough for a first price; add model numbers if you have them. Add your logo and target market if you need private label.

  • MOQ 500 pcs per model
  • Bulk lead time 7–35 days
  • Sample cost quoted per model before anything is sent

Or email sales6@nhruichi.com

Logo or reference photo (optional)

We reply with sample cost, unit price at 500 pcs and lead time for the products you asked about. Your details are only used to answer this enquiry.

Chat with us on WhatsApp Get a quote