Rechargeable LED work lights · MOQ 500 / model · samples first · private label

sales6@nhruichi.com+86 15258299580

Request a sample

Work Light Sample Checklist for Importers: 10 Things to Test

Before you order 500 pcs, test the sample the way your customers will use it. This checklist covers light output, battery, magnets and hooks, sealing, charging, packaging and paperwork — and what to ask the supplier for each point.

CheckHow to test the sampleAsk the supplier for
1. Output per modeGo through every mode and compare side by side with the light you sell todayLumens per mode, LED type (COB / SMD)
2. RuntimeCharge fully, run on high until it dims and note the timeRuntime per mode
3. ChargingCharge from empty with your own cable; watch the indicatorCharging time, port type, input rating
4. BatteryCheck the battery label and the weight of the lightCell type and capacity, UN38.3 summary, MSDS
5. MagnetStick it to a vertical steel panel and under a bonnet; tap itMagnet position; holding-force data if available
6. Hook and standHang it, rotate it, open and close the stand 20–30 timesHook type (folding / rotating), hinge material
7. SealingCheck the port cover and housing seams against the IP rating claimedIEC 60529 test report for that model
8. BuildA short drop onto a hard floor shows weak housings and loose boardsHousing material, rubber ends
9. Switch and modesPress the switch 50 times; check mode order and memoryMode sequence, lock function
10. Packaging and markingCheck box, barcode, warnings and marks for your marketArtwork template, CE / RoHS / FCC reports for the model

Our figures come from our product catalogue (updated 2026-11-16); general guidance describes typical values, not a guarantee for every product.

How many samples should an importer order?

Usually at least two per model: one to test hard, one to keep untouched as the reference for bulk production. Sample cost and courier time are quoted per model before anything is sent — see samples & MOQ.

What should be agreed before bulk production?

The approved sample, the spec sheet, the packaging artwork and the certificate for each model. For private label, approve the logo mock-up and housing colour too — see private label options and certificates.

Which models do importers usually sample first?

Most start with two or three best sellers across different types: RC-ST41 (Magnetic Underhood Light Bar), S09 (Slim Magnetic COB Stick Light 600 lm), RC-ST11U (10W COB Flood Work Light with Stand).

FAQ

More questions

How long do work-light samples take?

Sample cost and courier time are quoted per model with your request; see samples & MOQ.

What is the MOQ after the sample?

500 pcs per model, with a 7–35 day lead time depending on model, quantity and private-label options.

Request samples or a quote

Tell us what you need

Product type and quantity are enough for a first price; add model numbers if you have them. Add your logo and target market if you need private label.

  • MOQ 500 pcs per model
  • Bulk lead time 7–35 days
  • Sample cost quoted per model before anything is sent

Or email sales6@nhruichi.com

Logo or reference photo (optional)

We reply with sample cost, unit price at 500 pcs and lead time for the products you asked about. Your details are only used to answer this enquiry.

Chat with us on WhatsApp Get a quote